Jackson Care Membership Preventative HVAC Maintenance
With a Jackson Care Membership your preventative HVAC maintenance is a cinch. Our trained professionals will perform the necessary upkeep to ensure safe operation, optimal performance and increased energy efficiency for years to come.
Jackson Care
Membership Benefits
Worry-Free System Maintenance
We’ll get your home summer and winter ready on a semiannual basis with a precision heating & air conditioning tune-up & inspection.
Priority Service
When the weather gets extreme and calls are rolling in, Jackson Care customers move to the front of the line!
Discount Pricing
Jackson Care members receive our highest discounts on diagnostic and labor charges as well as parts.
Earn Loyalty Dollars
Receive exclusive membership-only discounts on qualifying new and replacement equipment purchases.
2-Year Parts & Labor Replacement Warranty
If a repair part is necessary, we’ll double our standard 1 year parts warranty to 2 years. You’ll also receive a 2 year labor warranty!
Inefficiency
The older a boiler system gets the more energy it is using to heat your home. Newer systems are designed to be both energy efficient and long-lasting.
What's Included?
1
Furnace
- Thermostat: Test for proper operation, calibrate and level
- Carbon Monoxide: Test air flow duct system for dangerous carbon monoxide
- Combustible Material: Inspect around furnace
- Ignition System: Test for safe and proper operation
- Exhaust System: Test for proper venting
- Temperature: Measure supply/return differential
- Safety & Control Circuits: Test for proper operation
- Fan Belt: Inspect and adjust tension (if applicable)
- Furnace Burner: Clean and inspect (brush and vacuum if needed)
- Heat Exchangers: Inspect (test if needed)
- Gas Pressure: Measure and adjust for peak efficiency
- Blower Motor: Measure amperage and voltage for proper operation
- Drain: Inspect for blockages and clean
- Float Switch: Test for proper operation
- Electrical Wiring: Inspect and tighten connections
- Combustion Vents: Clean and inspect (upper and lower)
- Natural Gas: Check for leaks (if needed)
2
AC
Indoor
- Thermostat: Test for proper operation, calibrate and level
- Air Filter: Inspected and replaced (if applicable)
- Bearings: Inspect for wear and lubricate (if needed)
- Indoor Coil: Inspect for debris
- Condensate Drain: Flush and check for blockages
- Refrigerant: Monitor operating pressures
- Duct Work: Inspect for energy loss
- Temperature Differential: Measure and evaluate
Outdoor
- Safety Devices: Inspect for proper operation
- Electrical Disconnect Box: Inspect for proper voltages and corrosion
- Electrical Wiring: Inspect for exposed wiring and tighten connections
- Contactor: Test/inspect for burned, pitted contacts
- Capacitor: Check for proper mfd range
- Outdoor Fan: Inspect for damage and oil if needed
- Bearings: Inspect for wear and lubricate if needed
- Condensor: Clean and remove debris
- Service Valves: Inspect for proper operation
- Compressor: Monitor, measure amperage and volt draw and wiring connections
3
Boiler
- Water Temperature: Verify proper heating temperatures
- Water Pressure: Verify proper pressures
- Aqua Stat: Inspect to confirm proper readings
- Expansion Tank: Verify proper charge
- Relief Valves: Pop to confirm safety
- Zone Valves: Inspect to ensure proper heating
- Carbon Monoxide: Test air flow duct system for dangerous carbon monoxide
- Combustible Material: Inspect around furnace
- Combustion Vents: Clean and inspect (upper and lower)
- Ignition System: Test for safe and proper operation
- Exhaust System: Test for proper venting
- Temperature: Measure supply/return differential
- Safety & Control Circuits: Test for proper operation
- Fan Belt: Inspect and adjust tension (if applicable)
- Burner: Clean and inspect (brush and vacuum if needed)
- Heat Exchangers: Inspect (test if needed)
- Gas Pressure: Measure and adjust for peak efficiency
- Drain: Inspect for blockages and clean
- Electrical Wiring: Inspect and tighten connections
- Natural Gas: Check for leaks (if needed)
4
Tankless Hot Water
- Flush System: Use of vinegar or safe chemicals to reduce scale inside of unit
- Carbon Monoxide: Test combustion flue for dangerous carbon monoxide
- Combustible Material: Inspect around unit
- Ignition System: Test for safe and proper operation
- Exhaust System: Test for proper venting
- Temperature: Test for safe water temperature
- Safety & Control Circuits: Test for proper operation
- Heat Exchangers: Inspect (test if needed)
- Gas Pressure: Measure and adjust for peak efficiency
- Electrical Wiring: Inspect and tighten connections
- Natural Gas: Check for leaks (if needed)
Pricing
Jackson Care Membership Starting at $15 a Month
| Equipment Bundles (2 Visits / Year) |
|---|
| Heat Pump & Air Handler |
| Gas Furnace & Air Conditioner |
| Equipment A La Carte (1 Visits / Year) |
|---|
| Gas Furnace |
| Air Conditioner |
| Heat Pump |
| Boiler |
| Tankless Water Heater |
| Add-On Accessories |
|---|
| Humidifier |
| Air Cleaner |
| Dehumidifier |
| Water Heater |
Customer Experience
With over 1,000 customer reviews and a five star rating – we’re proud of the reputation we’ve earned in the communities we serve.
Contact Us
24/7 Emergency Service | Evening & Weekend Appointments Available
LOCATION
499 E. Twinsburg Rd.
Northfield, OH 44067
SHOWROOM HOURS
Mon – Fri: 8:00am – 5:30pm
Sat: 8:00am – 12:00pm
Sun: CLOSED
LICENSES
HVAC OH LIC #15527
Plumbing OH LIC #PL22001
© 2021 Jackson Comfort Systems, Inc. All rights reserved. Website designed by ServLocal. Privacy Policy.